How to remove the workspace camera.

Your workspace camera is located at the rear of your machine.

Untitled-1-01.jpg

 

Follow these steps to remove your camera.

IMPORTANT: If installing a new camera, ensure you connect the camera cable before inserting the camera module into the housing.

 

STEP 01.

Remove the connector by gently pulling on the cable.

Untitled-1-02.jpg

 

STEP 02.

Un-clip the workspace camera by rolling it up towards you.

Untitled-1-03.jpg

 

STEP 03.

Seperate the front and back components of the camera housing to expose the camera module.

Untitled-1-04.jpg

 

STEP 04.

Remove the camera module from the housing. Take care not to damage the lens.

Important: If installing a new camera, connect the camera cable before inserting the Camera module into the housing.

 

Untitled-1-05.jpg

 

 

Have more questions? Submit a request

Comments

Article is closed for comments.