Calibrating the Emblaser 2 Camera

Your Emblaser 2 is fitted with a camera to help you align materials in your workspace.

There are two processes needed to calibrate the camera.

1: Calibrate the Camera Lens

The camera lens creates a very wide (fish-eye) field of view to capture as much of the workspace as possible. This calibration process will compensate for this lens effect.

NOTE: This calibration process has already been performed during manufacture for Rev.2 machines. If you have a Rev.2 or later machine, you can proceed to the next calibration process.


2: Calibrate Camera Alignment

This calibration process helps align your camera with your workspace. It is needed to compensate for the perspective effect of the camera.

Have more questions? Submit a request


Article is closed for comments.