Your Emblaser 2 / Core* is fitted with a Camera to help you align materials in your workspace. There are two processes needed to calibrate the Camera.
* The Camera is optional on the Emblaser Core.
1: Calibrate the Camera Lens
The camera lens creates a very wide (fish-eye) field of view to capture as much of the workspace as possible. This calibration process will compensate for this lens effect.
NOTE: This calibration process has already been performed during manufacture for Rev.2 machines. If you have a Rev.2 or later machine, you can proceed to the next calibration process.
2: Calibrate Camera Alignment
This calibration process helps align your Camera with your workspace. It is needed to compensate for the perspective effect of the Camera.