Read more about the project here: LINK
Material & Files:
LightBurn Project File: Download
Material: 3mm Plywood (We used Laser Poplar Plywood: LINK)
Other Materials Needed:
- Wood glue
- Wooden skewers
- Varnish or paint
This project uses many sheets of plywood (approx. 34 sheets). Make sure you have enough material before you begin.
Download and load the project file into LightBurn and cut out all the pieces.
Once the pieces are cut, apply a thin coat of glue between all the layers and clamp them together while the glue dries
You can apply a coat of varnish or paint to the finished sculpture if you like.