Here are a couple of tiles I put images on with my Emblaser 1. These are gloss white 3" x 6" and 4" x 4" tiles that were lightly sprayed with Valspar flat white paint + primer. After the burn the untouched paint is removed with lacquer thinner leaving the "carmelized" burnt paint fused to the glaze. It's very slightly raised and can't be scratched off.
I created the images in Illustrator then saved them as BMPs at 450 dpi. In Lightburn I used the same dpi and burnt them at 1350 mm/min and 70% power using the Stucki dither.
Please sign in to leave a comment.